Table of Contents
Advertisement
Troubleshooting
12.1.5 Error message "Product not disinfected!"
Product not disinfected!
12.2 System messages
12.2.1 "Checking the disinfectant effect" system message
12.2.2 "The doors are not closed properly!" system message
The doors are not closed properly!
12.2.3 "Product not disinfected!" system message
32
The product was not disinfected.
► Start the disinfection again (section "Starting the
disinfection" – see page 29).
Information on this can be found in the section „Check
ing the disinfectant effect" – see page 37.
Close the doors properly so that they can be locked by
the control unit.
The product was not disinfected.
► Start the disinfection again.
701Z42=1-1, 701Z42=1-4
Advertisement
Table of Contents
