Xerox D125 User Manual page 92

Problem solving
Symptoms Check
Online indicator Is the interface cable
does not light disconnected?
even though you
instructed it to
print.
Is the environment correctly
set on the personal
computer?
Is the required interface set?
Tray 5 (Bypass) Is correct paper loaded on
printing failed. the tray?
Unsatisfactory Image defect.
print quality.
Text prints Non-standard fonts are used
incorrectly (text for printing.
is corrupted).
Online indicator Data remains in machine
lights, but copies memory.
are not delivered
with Online still
lit.
Cannot open or Did you open a cover or turn
close trays. power off during printing?
10-26
Remedy
Turn the power switch off, unplug the power
cord from the power outlet, and check the
interface cable connection.
For information about network settings, refer
to the System Administration Guide.
Check the print driver and other environment
settings on the personal computer.
Check the status of the interface port in use.
For information about network settings, refer
to the System Administration Guide.
Follow the instructions displayed to load paper
of the correct size and instruct it to print again.
Refer to the image quality troubleshooting
section for more information.
Check the application or print driver settings.
Cancel printing, or purge remaining data.
Turn the power off without closing or opening
a paper tray. Wait several seconds and then
turn the power switch on. Make sure that the
machine is online (ready to receive data) and
then close or open the paper tray.
User Guide