Empty The Punch Waste Container - Xerox D125 User Manual

Standard Finisher Plus

Empty the Punch Waste Container

The UI displays a message indicating when it is time to empty the Punch Waste
Container.
Caution
Only remove the Punch Waste Container while the system is powered ON. If you switch
off the power when emptying the container, the machine cannot detect that the
container was emptied.
1. Make sure that the machine has stopped printing.
2. Open the right cover on the finisher.
3. Pull the container out of the finisher ( R4).
4. Discard all the punch scraps in an appropriate container.
18-12 User Guide