Xerox D125 User Manual page 142

Interface Module/Interface Cooling Module
Note
The Interface Module is not available with the D95 Copier/Printer configuration.
D110/D125 configurations
For either Copier/Printer or Printer only, the Interface Module is required with the
following finishing devices:
GBC AdvancedPunch
Perfect Binder (available only with the Copier/Printer with integrated controller)
High Capacity Stacker (HCS)
Standard Finisher Plus
All third-party, DFA devices
Note
The Interface Module is NOT required when the only finishing device is the Standard
Finisher or Booklet Maker Finisher. The SquareFold Trimmer Module is available only
with the Booklet Maker Finisher.
D136 configuration
For either Copier/Printer or Printer only, the Interface Cooling Module is required with
ALL following finishing devices, which include:
GBC AdvancedPunch
Perfect Binder (available only with the Copier/Printer with integrated controller)
High Capacity Stacker (HCS)
Standard Finisher
Booklet Maker Finisher
SquareFold Trimmer Module (available only with the Booklet Maker Finisher)
Standard Finisher Plus
All third-party, DFA devices
14-2 User Guide