Xerox D125 User Manual page 84

Problem solving
Fault code Cause and Remedy
016-777 Cause: A hard disk error occurred during image processing.
Remedy: The hard disk might be defective. When replacing a hard disk, contact
the Customer Support Center.
016-778 Cause: Conversion processing of scanned image was interrupted because of
insufficient disk space.
Remedy: Remove unnecessary data from the hard disk to increase free disk space.
016-779 Cause: An error occurred during scanned image conversion processing.
Remedy: Retry scanning.
016-780 Cause: A hard disk error occurred during scanned image conversion processing.
Remedy: The hard disk might be defective. When replacing a hard disk, contact
the Customer Support Center.
016-786 Cause: When using the scan feature, hard disk capacity is insufficient for writing
to a file.
Remedy: Either remove unnecessary data from the hard disk to increase free disk
space or initialize the hard disk.
016-788 Cause: Failed to load a file from the Web browser.
Remedy: Perform the following actions, and try again.
Reload the browser page
Restart the browser
Power-cycle the machine
016-792 Cause: Specified job history could not be acquired when printing Job Counter
Report
Remedy: Specified job history does not exist.
016-799 Cause: An illegal print parameter is included.
Remedy: Confirm the print data and option and specify the print data again.
021-750 Cause: During an inspection or maintenance request a transmission error occurred
021-751 and our Customer Support Center could not be contacted.
021-770 Remedy: Check that the phone lines are connected and try sending an inspection
021-771 or maintenance request again after a short time. If the error persists, contact the
021-772 Customer Support Center.
10-18 User Guide