Folding Feature - Xerox D125 User Manual

No. Component
2 Post-process inserter (Tray
8/Tray T1)
3 Punch scrap container
4 Staple cartridge
5 Staple waste container
6 Top tray
7 Stacker (middle) tray
8 Right cover
9 C/Z-Fold output tray
(optional)
10 Left cover.

Folding feature

If your machine is equipped with the Booklet Maker Finisher and/or the C/Z Folder, you
can make prints using the folding option. The option folds your prints in half (single or
bi-folding) or in thirds (C-fold or Z-fold types). The folding option is selected from the
print driver.
®
Xerox D110/D125/D136 Printer
User Guide
Function
This tray is standard on this finisher and is used to
load paper that will be used as separators and covers.
Paper loaded here is not printed on; use this tray for
pre-printed stock and for insertion into the printed
output. (This tray is also known as the Interposer).
Tray 8 holds a maximum of 200 sheets when using
20 lb./75 gsm paper.
Paper can be loaded in the LEF or SEF direction.
Collects the scraps from the puncher. Open to remove
the scraps.
Contains staples; remove this cartridge to replace staples
and clear staple jams.
Container for staple waste; remove this container when
full.
The Top Tray is used for stacked output, and can receive
up to 500 sheets of 20 lb./80 gsm paper. Copies are
delivered here when specific output features are selected,
such as Automatic sorting, Collated, Uncollated, or
Normal.
The Stacker Tray is used for offset and/or stapled output,
and can hold up to 2000 sheets of 20 lb./80 gsm paper.
This tray also receives copies when you punch and Z-fold
copies.
Note
Both the Top and Stacker Trays can be used for hole
punched output (optional).
Open to clear paper jams, replace staples, clear jammed
staples, or remove the scraps from the puncher.
The optional Folder tray receives copies when you select
C-folding or Z-folding of 8.5 x 11 in./A4 output and 11 x
17 in./A3 media.
Open this cover to access the machine and to clear paper
jams.
Standard Finisher Plus
18-3