Loss Of Power; Fault Codes - Xerox D125 User Manual

High Capacity Stacker (HCS)

Loss of power

If power is interrupted to the HCS:
Ensure that the power cord is plugged in to the proper wall receptacle.
Ensure that the machine power is switched on.
Ensure that the Ground Fault Indicator is in the On position.
If the power has not been restored by checking the above items, then call for service.

Fault codes

049-100
Cause: There is a top tray sensor fault in the HCS.
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
Carefully remove all sheets and paper scraps from jam clearance areas.
049-101
Cause: There is a top tray sensor fault in the HCS.
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
Carefully remove all sheets and paper scraps from jam clearance areas.
049-102
Cause: There is a top tray sensor fault in the HCS.
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
Carefully remove all sheets and paper scraps from jam clearance areas.
049-104
Cause: HCS bypass exit sensor fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
15-10 User Guide