Xerox D125 User Manual page 226

Standard/Booklet Maker Finisher
Remedy: Check staples and reset correctly.
024-979
Cause: The staple cartridge is empty
Remedy: Check staples. Follow procedures to remove and replace staple cartridge.
024-980
Cause: The stacker tray is full
Remedy: Remove all paper from the stacker tray.
024-981
Cause: The top tray is full.
Remedy: Remove all paper from the finisher top tray.
024-982
Cause: The finisher stacker tray lower safety warning in on
Remedy: Remove all paper from the stacker tray and remove any other obstructions.
024-983
Cause: The finisher booklet tray is full
Remedy: Remove all paper from the booklet tray.
024-984
Cause: The booklet stapler low staple signal is on
Remedy: Remove all paper from the booklet tray.
024-985
Cause: The booklet stapler low staple signal is on
Remedy: Remove all paper from the booklet tray.
024-987
Cause: The booklet folder tray is full
Remedy: Remove all paper from the tray. Set the output tray for three fold.
024-988
Cause: The booklet folder tray is full
Remedy: Check that the folder tray is correctly attached and set.
024-989
Cause: There is a problem with the booklet maker stapler
Remedy: Check the staple cartridge and reset correctly.
047-320
Cause: A communication error has occurred with the finisher
Remedy: Perform the following:
16-46 User Guide