Fault Codes - Xerox Color J75 Press User Manual

Problem solving
4. Close the Inverter bottom right cover.
5. If the finisher is installed, close the front door of the finisher.

Fault Codes

If an error caused the printing to end abnormally, or a malfunction occurred in the
machine, then an error code is displayed.
If an error code appears that is not listed in the table below, or if an error persists after
following the listed solution, then contact your Xerox Customer Support Center.
If an error code is displayed, all print data of the machine as well as print data stored
in the machine built-in memory is discarded.
002-770
Cause: Unable to process the job template due to insufficient hard disk space.
Remedy: Remove unnecessary data from the hard disk to increase free disk space.
003-750
Cause: Unable to store any documents with 2 Sided Book Copy feature.
Remedy: Check the 2 Sided Book Copy settings.
003-751
Cause: The machine is unable to process size, because the specified document area
is too small.
Remedy: Increase the resolution or scan area size.
003-752
Cause: When setting a mixed size document to Full Color/2 Side and attempting to
scan at 600dpi, an error occurs.
10-14 Xerox Color J75 Press
®
User Guide