Sargent ASSA ABLOY IDP-H1 Installation Instructions Manual page 13

Harmony Series IDP-H1 Mortise Lock
14 Install Inside Rose and Inside Lever Assembly
1. Rotate the inside rose - first counter clockwise
to seat the threads and then, clockwise to
securely tighten.
2. Slide lever handle onto spindle until fully
seated. Be sure handle is horizontal and
facing the hinge side of the door. Push lever
onto spindle so minimum gap is visible.
3. Tighten the set screw securely with
a 1/8" hex wrench.
4. Before closing the door, test that
lever is functional and ensure
smooth operation of the
latchbolt and deadbolt.
15 Attach Front Plate
1. Attach front plate with (2) 8-32x1/4" flat head screws
and tighten securely.
A8132C • 800-810-WIRE (9473) • www.sargentlock.com
Outside of Door
Fig. 14
13
Inside of Door
Spindle
Rose
Set Screw
Inside Lever
Fig. 13A
(2) 8-32x1/4"
Flat Head Screws
Fig. 13B