Table of Contents
Advertisement
Field Wiring Connections
The 9700 Power Meter's Label
The current input option is
indicated here. Ensure that
the CT secondaries you
connect the device to are
compatible with the current
level stated in this box.
The Voltage input option is
indicated here. Do not
connect voltage levels that are
greater than what is stated
here.
(&ÃQPX@SÃH@U@SÃDITU6GG6UDPIÃ6I9Ã76TD8ÃT@UVQ
&I JEQMPMEV [MXL XLI [EVRMRKW TVIWIRXIH EX XLI FIKMRRMRK SJ XLMW
HSGYQIRX FIJSVI TVSGIIHMRK [MXL XLI MRWXEPPEXMSR SJ XLI 4S[IV
1IXIV
The 9700 Power Meter is available with several different options, and some
of these options require special installation procedures. Refer to the label
on the 9700 Power Meter (located above the phase voltage and current input
terminal strip) to see which options are included on the device you are
installing.
If included, the ratings
for the four auxiliary
analog inputs are stated
here.
The options box on the above label can contain any of the codes shown in
the table on the following page.
Note that the optional analog input board, the I/O expansion boards,
additional power supplies, MGT accessories, and the revenue meter key are
all ordered as separate items. They do not appear in the options box on the
9700 Power Meter's label.
The acceptable power supply
range is indicated here. See the
power supply discussion below
for more details.
Any additional options are indicated
here. Available options are listed
below.
(
Advertisement
Table of Contents
