SOLTEK B7A-F User Manual page 64

Typematic Rate (Chars
/ Sec)
Typematic Delay
(Msec)
Security Option If you have set a password, select whether the
APIC Mode Allows you to enable (default) / disable the APIC
OS Select For DRAM >
64MB
When the typematic rate setting is enabled, you can
select a typematic rate (the rate at which character
repeats when you hold down a key) of 6, 8, 10, 12,
15, 20, 24, or 30 characters per second.
Choices: 250; 500; 750; 1000. This option sets the
time interval for displaying the first and the second
characters. If enabled, the time interval is optional.
password is required every time the System
boots, or only when you enter setup.
Choices: System; Setup(default)
(Advanced Programmable Interrupt Controller)
function. APIC mode will expand available IRQs for
the system when enabled.
Select OS2 only if you are running OS/2 operating
system with greater than 64MB of RAM on your
system.
67
Chapter 4 BIOS Setup