SOLTEK B7A-F User Manual page 66

System Performance Allows you to set different system performance
FSB Frequency Allows you to set the FSB Frequency.
CPU Interface This value will change in accordance of the setting
Memory Frequency This item allows you to set the Memory Frequency.
Resulting Frequency This item is to show the current DRAM Frequency.
Memory Timing This value will change in accordance of the setting
T(RAS) This value will change in accordance of the setting
T(RCD) This value will change in accordance of the setting
T(RP) This value will change in accordance of the setting
Cas Latency This value will change in accordance of the setting
FSB Spread Spectrum Allows you to enable (0.50%, 1.00%) / disable
AGP Spread Spectrum This option can reduce the EMI (ElectroMagnetic
Frame Buffer Size Allow you to set the onboard VGA memory size.
modes.
Choices: Optimal; Aggressive; Turbo; Expert
The Choices: 100MHz(default); 133MHz; 166MHz;
100MHz~250MHz(when "System Performance" is
set to "Expert")
of "System Performance".
Usually the resulting frequency will be decided by
the percentage setting multiplied by FSB Frequency.
SPD (Serial Presence Detect) is located on the
memory modules, BIOS reads information coded in
SPD during system boot up.
Choices: By SPD(default); Auto; 50%~200% (when
"System Performance" is set to "Expert")
of "System Performance".
of "System Performance".
of "System Performance".
of "System Performance".
of "System Performance".
(Default) FSB Spread Spectrum.This option can
reduce the EMI (ElectroMagnetic Interference) gen-
erated by the CPU.
Interference) generated by the AGP.
Choices: 8M; 16M; 32M; 64M; 128M; Disabled.
69
Chapter 4 BIOS Setup