Graphics Driver Installation - SOLTEK B7A-F User Manual

3-5 Graphics Driver Installation

Following the installation of DirectX Installation, you have to restart sys-
tem so that your system can be reconfigured with the utility. When re-
starting procedures finish, please open the Support CD with your CD-
ROM to enter the Main Installation Menu.
1. For installation of on-board VGA driver, you must first connect the
monitor to the on-board VGA connector. Then click to "Install Graphics
Driver". The Graphics Driver is specifically for on-board VGA.
2. When the screen of "nVIDIA Display Drivers" appears, please press
"Next" button to continue.
3. After all the setup procedures have completed, click to "Finish" button
to exit the Installation program and re-start your system.
Chapter 3 Software Setup
kÉñí
cáåáë Ü
51