SOLTEK B7A-F User Manual page 67

B7A-F
AGP Aperture Size Series of options are available: 32, 64, 128, 256 or
512 MB. Memory mapped and graphics data struc-
tures can reside in a Graphics Aperture. This area
is like a linear buffer. BIOS will automatically report
the starting address of this buffer to the O.S. The
default setting is 64MB.
AGP Frequency Allows you to adjust the working frequency of an
AGP card. The default AGP Frequency is 66MHz.
Choices: Auto, 50MHz ~ 100Mhz
AGP 8X Support Allows you to enable(default) / disable AGP 8X
mode.
AGP Fast Write This item will enable the AGP mode into fast write
Capability mode. If your graphics card does not support this
function, please do not enable this function.
If your CPU is up to certain temperature that may
CPU Thermal- Throt-
damage itself, this option can be set to lower down
tling
current CPU speed to decrease temperature to pro-
tect CPU itself. The percentage in the option is to
set how fast the running speed of the CPU is.
Choices: Disabled; 12.5%~87.5% in 12.5% stepping
System BIOS Selecting Enabled allows caching of the system
Cacheable BIOS ROM at F0000h-FFFFFh, resulting in better
system performance.
Video BIOS Cacheable Selecting Enabled allows caching of the video
memory (RAM) at A0000h-AFFFFh, resulting in bet-
ter video performance. However, check your AGP
manual to find out if any compatibility problem exists.
AUTO PRE WR Allows you to enable(default) / disable auto
precharge when current access is completed.
USB20 HDD Allows you to enable(default) / disable the USB 2.0
Hard Disks.
TV Mode Support Allows you to enable / disable(default) TV mode
support.
Choices: NTSC-M; NTSC-J; PAL-M; PAL-BDGHI;
PAL-N; PAL-NC; Disabled
70