Table of Contents
Advertisement
Preparation for operation
Transport, transporting and rest
positions
Warning 6
Danger of injury due to:
• Uncontrolled lateral movement of the swing arm!
• Tilting of the stand!
• Feet in lightweight shoes could become trapped
beneath the casing of the base.
➩For transportation, always move the Leica M525 OH4
surgical microscope into the transport position.
➩Never move the stand in the extended condition.
➩Never roll over cables lying on the floor.
➩Always push the Leica M525 OH4 surgical microscope
- never pull it.
Caution 2
Surgical microscope can move without warning!
➩Always lock the footbrake when you are not moving
the system.
Transport position
Always move your Leica M525 OH4 into the transport position
before transporting it.
Caution 3
Damage to the Leica M525 OH4 surgical microscope
due to uncontrolled tilting!
➩Hold the CAN handle when releasing the brake.
Caution 4
Damage to the Leica M525 surgical microscope during
transportation!
➩Never move the stand in the extended condition.
➩Never roll over cables lying on the floor.
➩Press the "All Brakes" button and move the Leica M525 OH4
into the transport position (see illustration below).
36
➩Unplug and secure the power cable.
➩Release the footbrake.
➩Depress the footbrake at the front end (FREE).
The footbrake disengages and is released.
➩Move the Leica M525 OH4 using the handle.
Rest position
Bring the microscope into rest position after use.
➩Push the microscope in the transport position to its storage
location.
➩Depress the footbrake at the rear end (LOCK) until it engages.
➩Pull the protective cover over the Leica M525 OH4.
Leica M525 OH4 / Ref. 10 714 367 / Version -
Make sure that the video monitor does not collide with
the horizontal arm and the vertical arm of the stand.
Advertisement
Table of Contents
