Transport Position; Rest Position; Shutting Down The Surgical Microscope; Touch Panel - Leica M844 User Manual

8.5

Transport position

Whenever you transport your Leica M844 F40, first bring it into
transport position (see chapter 7.1).
• Transporting the M844 F20 (see chapter 7.1.1)
• Transporting the Leica M844 F40 (see chapter 7.1.2)
8.6

Rest position

Bring the microscope into rest position after use.
X
8.6.1 F40 and F20 floor stands
NOTE
Danger of collision!
The surgical microscope can collide with surrounding components,
the ceiling or lamps.
Take care there is enough free space.
X
After bringing the microscope into transport position, push it to
X
its storage location.
Firmly depress the footbrake.
X
Protect your Leica M844 by covering it with its dust cover.
X
8.6.2 CT40 ceiling mount
CAUTION
Danger of collision!
The surgical microscope can collide with surrounding
components, the ceiling or lamps.
Check the danger area before moving the swing arm.
X
Carefully move the ceiling mount upwards, and observe
X
ceiling and lamps.
Swing the microscope away.
X
Remove sterile components.
X
Lock the swing arm.
X
Switch off the power switch on the swing arm.
X
Press the "Up" key on the remote control and raise the stand.
X
8.7 Shutting down the surgical
microscope
Where appropriate, end the recording procedure on the
X
documentation system (loss of data).
Bring the surgical microscope into the transport position.
X
Switch off the surgical microscope at the main switch.
X
9
9.1
1
1 Operational mode (light/
magnification settings)
2 Operational mode (drive
settings)
3 Configuration menu
4 Static menu bar (remains
unchanged)
9.2
WARNING
Motors return to their home positions
Switch on your microscope at the power switch of the horizontal
X
arm.
As soon as the main illuminator lights up, your microscope is
X
ready to use.
After the surgical microscope is switched on, the settings of
the last active user are loaded.
M844 / Ref. 10 713 294 / Version 01

Touch panel

Menu structure

2 3
7
5 Displays help texts for
6 Dynamic button bar
7 Display area with status bar

Switching the microscope on

Before switching on your Leica M844, ensure that the
X
travel paths of the XY, zoom and focus motors are free of
obstructions. The tilt motor is not moved.
Touch panel
4 5
6
individual topics
47