Leica M525 OH4 User Manual page 47

Selecting users
In the "Main" and "Speed" menus, three buttons are always dis-
played in the dynamic button line: "Presets", "User List" and
"Show Settings".
You can find a list of default users preset by Leica for the most
common types of operation under "Presets".
➩Select one of the preset default users and click "Load".
The Leica M525 OH4 surgical microscope is ready to operate
straight away.
You can adapt and save the settings of these default
users as required (see page 44).
You can click the "Show Settings" button at any time to
see an overview of the user settings of the current
user.
Clicking the "User List" button opens a two-screen list of users
from which you can select one of up to 30 configurable users.
Click the "1-15" or "16-30" button to switch between screens.
➩Select user and click "Select".
The user settings are loaded.
➩Click "Show Settings" button to see an overview of the user
settings of the curent user.
Leica M525 OH4 / Ref. 10 714 367 / Version -
When the user list is open, it can be edited at any time
(see page 45).
Before every operation, make sure the required user is
selected and familiarize yourself with the assignments
of the CAN handle and, if used, the optional footswitch.
Use
45