Manufacturer's Declaration Of Electromagnetic Compatibility (Emc) - Leica M525 OH4 User Manual

Manufacturer's declaration of electromagnetic compatibility (EMC)

This "Guidance and manufacturer's declaration" document is based on EN 60601-1-2:2001.
Table 201 from EN 60601-1-2:2001
Guidance and manufacturer's declaration – electromagnetic emissions
The Leica M525 OH4 surgical microscope is intended for operation in an environment as specified below.
The customer or the user of the Leica M525 OH4 surgical microscope should make sure that it is used in such an environment..
Emissions test
RF emissions
according to CISPR 11
RF emissions
according to CISPR 11
Harmonic emissions
according to
IEC 61000-3-2
Emissions of voltage
fluctuations/flicker
according to IEC 61000-3-3
Compliance Electromagnetic environment – guidance
Group 1 The Leica M525 OH4 surgical microscope uses RF energy only for its
internal function. Therefore, its RF emissions are very low and are not
likely to cause any interference in nearby electronic equipment.
Class A The Leica Leica M525 OH4 is suitable for use in establishments
other than domestic and those directly connected to the public low-
voltage power supply network that supplies buildings used for residential
purposes.
Class A
compliant
Leica M525 OH4 / Ref. 10 714 367 / Version -
Safety notes
61