Leica Di C500 - Leica M525 OH4 User Manual

Use

Leica DI C500

Operating the control unit
If you are using a DI C500, a Quick Access Button "DI C500" is
added to the static menu line.
Changing the current brightness of the image data:
➩Press the "+" or "-" key on the "DI C500" screen.
or
➩Adjust directly by clicking the brightness adjustment bar.
Clicking the "+" or "-" key changes the brightness value
in increments of one. Holding down the mouse button
with your finger changes the value in increments of
five.
Press button "Image off" to switch of the DI C500
display (brightness = 0 %).
You can also adjust the brightness of the image data
using the CAN handle/footswitch.
52
Controls on the CAN handle/footswitch
You can assign the following functions to your CAN handle/
footswitch for controlling your Leica DI C500 (see page 12):
"DI C500: Image Injection on/off"
Switches the data display on/off manually. The shutters are
switched as pre-configured in the user settings.
"DI C500: Shutter Control"
Opens or closes the shutter manually as pre-configured in the
user settings.
"DI C500: Brightness+"
Increases the brightness of the image data.
"DI C500: Brightness-"
Reduces the brightness of the image data.
User settings
You can configure the following settings for the user in the user
settings:
• Default brightness for the injection of overlay data and non
overlay data
• Shutter settings for manual operation
• Shutter settings
• Surgeon's shutter settings
Setting the default brightness for the injection of overlay data
and non overlay data:
➩To adjust the brightness, press the "+" or "-" key or click
directly in the bar.
Leica M525 OH4 / Ref. 10 714 367 / Version -
You require this function for example when you want to
display endoscope data on your Leica DI C500.