Programming - Thermo Scientific Shandon TissueWave 2 Operator's Manual

There are some concepts about the Shandon TissueWave 2 unit
which should be understood prior to beginning programming.
The Shandon TissueWave 2 has two
Control Control
used:
Parameters Parameters
Use the
when prompted.
In
adjusted to maintain a particular
The
Mode
The
In
Defined Preset Value
Solution Temperature
When using most
the

4 - Programming

• Temperature Control
• Power Control
Function Keys
Temperature Control Mode
Temperature Profile
field.
Timer Mode
options are:
• Time @
- Used to define the
Solution
when the
• Time T
- Used to define the
Ramp Time
the
Power Control Mode
Published Procedures
Temperature Control Mode
Control Modes
Temperature (T)
to select
Output Power
, the
Temperature Profile
can be further defined using the
Procedure Time
reaches the required temperature.
Total Procedure Time
required to achieve the correct temperature.
Output Power
, the
.
is ignored as a control factor.
, the user will need to use
.
TissueWave 2 Operator Guide
which can be
Power (P)
or
is continually
.
Timer
from the time
including
User-
is held at a
33