Recharge The Lithium-Ion Battery Pack - Minelab CTX3030 Instruction Manual

CTX 3030 Instruction Manual
Batteries
Battery LED Indicator
Power LED Indicator
Figure 37 – BC 10 Front Panel
Battery LED
OFF
Slow flashing green
Fast flashing red
Steady on green
Power LED
OFF
Steady on green
Fast flashing red
Table 38 – BC 10 battery charge and power status information

Recharge the Lithium-Ion Battery Pack

1. Remove the battery pack from the detector and place it into the charger unit,
ensuring that the connector pins line up.
No battery plugged into charger
Battery is charging, normal operation
Charger error detected
Battery is fully charged
No input power, charger is OFF
Correct input voltage, charger is ON, normal operation
Incorrect input voltage, charger cannot operate
57