Sort Programmes; Prog. Colour Allocation; Process Technology; Anti-Crease - Miele PDR 918 HP Operating And Installation Instructions

Supervisor level
Drum reversal
–
0 – 500 seconds
Pause
– :
100 – 300 seconds

Sort programmes

Programmes can be moved within the programme list and in the Favourites list.
- Factory setting: Off
- On
Moving programmes/favourite programmes
You can move/change the order of the programmes (programme menu – single selection
list). You can also move and change the order of the favourite programmes in the
Supervisor level under Favourites.
Touch the programme that you wish to move.

Press and hold the sensor until the frame changes.

Drag the programme to the required position.


Prog. colour allocation

You can assign a specific colour to a favourite programme. In the list of favourites, each
favourite programme is given a coloured frame, which can be selected.
- Factory setting: Off
- On

Process technology

Anti-crease

At the end of the programme, the drum will continue to rotate at intervals if the laundry is
not removed immediately.
Changing this setting leads to increased energy consumption.
The setting  can be switched off or set to a time between 1 and 12 hours.
Factory setting: Off

Drying levels

Changing this setting leads to increased energy consumption.
You can alter the drying levels for the
iron
programmes.
Cottons
Drying levels
levels.
Factory default setting: Normal
50
:
Cottons
Minimum iron Automatic plus
, and
Minimum iron Automatic plus
, ,
can be set to one of 7 different
Machine
and