Selecting Programme Packages - Miele PDR 914 HP Operating And Installation Instructions

Initial commissioning
18
Setting the time
Clock display
14 02

13 01
12 00
11 59
10 58
Place your finger on the number that you want to change and move

your finger upwards or downwards.
OK
Confirm with the

The display will change to the next setting.

Selecting programme packages

You can select various programmes from the programme packages.
Any programmes already active are highlighted in orange.
Programme packages
Label Standard
Cottons  Cottons
Cottons PRO
Minimum iron
Swipe to the left with your finger until you reach a programme that

is not highlighted in orange.
Touch the programme to be activated.

The selected programme is now active and highlighted in orange.
You can select further programmes if required.
If you do not want to select any more programmes, confirm with

OK
.
The display will change to the next setting.
Tip: You can disable a selected programme by touching the pro-
gramme again. Exception: The
grammes cannot be disabled.
Setting up a payment device
If you wish to set up a payment device, read the "Payment system"
section of the "Supervisor level" chapter. You can only make these
settings during initial commissioning. If you wish to change the set-
tings after the commissioning process, please contact the Miele Cus-
tomer Service Department.
If you do not wish to set up a payment device, you can skip this step.
OK
sensor control.
11:02
Woollens
Delicates
OK
Cottons  Cottons PRO
and pro-