Connecting To A Wi-Fi Network - Avaya Cloud Office J159 Manual

Procedure
1. Press Main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Network, and press Select.
4. Scroll to Network mode.
The Network mode setting shows the following options:
• Ethernet: To connect to an Ethernet network.
• Wi-Fi: To connect phone to a Wi-Fi network.
5. Press one of the following:
• Toggle
• Right arrow key
• Left arrow key
6. When Network mode displays Wi-Fi, the following lines are shown on the Phone screen:
• SSID: The name of the Wi-Fi network that the phone is either currently connected to, or
will attempt to connect to if you start the connection process.
• Wi-Fi network: Scroll to this line and press Select to view the list of Wi-Fi networks.
7. After selecting the network mode, press Save.
8. When you switch Network mode from Ethernet to Wi-Fi, see "Connecting to a Wi-Fi
network" section.
9. When you switch Network mode from Wi-Fi to Ethernet , press Save.
10. When the phone prompts for permission to restart, press OK.
Press Cancel to go back to previous step.
Related links

Connecting to a Wi-Fi network

Setting the network configuration
Connecting to a Wi-Fi network
About this task
Use this procedure if your phone is not configured to connect to a specific Wi-Fi network
Before you begin
• Ensure that the system administrator gave you access to perform this task.
• Select Wi-Fi as your network mode.
• When you set the network mode, note the SSID, as this is the name of the Wi-Fi network that
the phone will attempt to connect to.
July 2020
on page 67
on page 68
Using Avaya J159 IP Phone in an Avaya Cloud Office
Comments on this document? infodev@avaya.com
Setting the network mode
™
67