Sungrow SG5.0RS-ADA User Manual page 63

User Manual
Parameter
Name
Time zone
Plant address
Grid-connec-
tion type
Grid-connected
date
Owner's email
address
Postal code
Plant image
Feed-in tariff
Consumption
tariff
step 5 Bind a device through scanning the QR code on the device, manually inputting the device S/
N, or uploading a QR code picture. Tap Confirm after the QR code is identified or the S/N is
verified.
Description
The time zone where the plant is located, which can be filled through
automatic positioning and manual input.
The location of the plant, which can be filled in two ways:
• Manually: Manually enter the plant location in the input box.
• Automatically: Tap
or search for the location of the plant, and then tap Confirm.
The way the plant is connected to the grid, including 100% Feed-in,
Self-Consumption, Zero Export, and Off-grid.
The time when the plant is connected to the grid.
Fill in the owner information of the plant, and both registered and un-
registered email addresses are supported.
The postal code of the place where the plant is located.
Take photos of the plant and upload them.
The feed-in tariff can be set in two ways:
• Enter the feed-in tariff directly in the input box.
• Tap More Configurations, select the tariff unit, enter the feed-in
tariff, and tap Confirm. Enable Time-of-Use Tariff if needed. Tap
Add Time-of-Use Tariff, add time intervals and price, and tap Con-
firm. Please note that if Time-of-use Tariff is enabled, the time pe-
riods shall cover 24 hours a day, and can not overlap.
Set the consumption tariff as follows:
• Tap More Configurations, select the tariff unit, enter the consump-
tion tariff, and tap Confirm. Enable Time-of-Use Tariff if needed,
and refer to the setting methods of the feed-in tariff.
to automatically obtain the current location
6 Commissioning
53