Table of Contents
Advertisement
78
Occupant safety
¯ If the child restraint system is equipped
with a Top Tether belt:
The risk of injury may be reduced by Top
Tether. The Top Tether belt enables an
additional connection between the child
restraint system attached with ISOFIX or
i‑Size and the vehicle.
If necessary, slide head restraint
#
(
page 133).
/
Remove cover
2
of Top Tether anchorage
#
3.
Fit the ISOFIX or i‑Size child restraint system
#
with Top Tether. In doing so, comply with the
child restraint system manufacturer's installa-
tion instructions.
Guide Top Tether belt
4
under head restraint
#
1
between the two head restraint bars.
Hook Top Tether hook
5
of Top Tether belt
#
4
into Top Tether anchorage
twisting.
1
upwards
Tension Top Tether belt 4. In doing so, com-
#
ply with the child restraint system manufactur-
er's installation instructions.
If necessary, slide head restraint
#
wards (
/
not interfere with the correct routing of Top
Tether belt 4.
Vehicles with rear airbag
Notes on the suitability of seats for attaching belt-
secured ISOFIX and i-Size child restraint systems
Left and right rear seat
Weight category 0: up to 10 kg
Rear airbag enabled
Rear airbag disabled
Weight category 0+: up to 13 kg
Rear airbag enabled
Rear airbag disabled
3
without
1
down-
page 133). Make sure that you do
X
1
U, L
X
1
U, L
Advertisement
Table of Contents
