Mercedes-Benz S-Class 2022 Owner's Manual page 498

Mercedes-Benz recommends having the oil
changed at a qualified specialist workshop.
Only use engine oils approved for your vehicle by
Mercedes-Benz.
Petrol engines: for certain countries, different
engine oils can be used in conjunction with
reduced maintenance intervals. Further informa-
tion on different engine oils can be obtained at a
qualified specialist workshop.
Engine oil quality and filling capacity
Not for plug-in hybrid:
Engine oil specifications (petrol engines)
Model MB-Freigabe or MB-
S 580 4MATIC
All other models 229.51, 229.52,
229.61, 229.71
Engine oil specifications (diesel engines)
Model
S 350 d
S 350 d 4MATIC
S 400 d 4MATIC
Plug-in hybrid:
Engine oil specifications
Model
S 580 e
Approval
S 580 e 4MATIC
229.52
* recommended for lowest possible fuel con-
229.61*
sumption (lowest SAE viscosity class in each
case; observe possible restrictions of the
approved SAE viscosity classes)
To achieve the lowest possible fuel consumption,
229.72*
it is recommended to use the engine oil specifica-
tions marked in the table for the lowest SAE vis-
cosity class. Possible restrictions of the approved
SAE viscosity classes must be observed.
MB-Freigabe or MB-
Plug-in hybrid: use only engine oils of viscosity
Approval
class SAE 0W-40 or SAE 5W-40.
229.52
%
If the engine oils listed in the table are not
229.61*
available, you may add a maximum of 1.0 litre
of the following engine oils once only.
Engine oils for one-time filling only in exceptional
cases:
Plug-in hybrid: MB-Freigabe or MB-Approval
R
229.31 or ACEA C3
MB-Freigabe or MB-
Petrol engines:
Approval
R
-
229.51, 229.52
-
Diesel engines: MB-Freigabe or MB-Approval
R
229.51 or ACEA C3
The following values refer to an oil change, includ-
ing the oil filter.
Not for plug-in hybrid:
Technical data 495
S 580 4MATIC: MB-Freigabe or MB-
Approval 229.51 or ACEA C3
All other models: MB-Freigabe or MB-
Approval 229.31 or ACEA C3