Table of Contents
Advertisement
System limits
The marker for the detected vehicle in front may
be inaccurate or may not be applied to the cor-
rect vehicle in some situations. Always pay atten-
tion to the actual driving situation.
Route guidance with augmented reality is not
available in some situations, e.g. in the event of
poor satellite reception or roads that have not
been digitised.
Visibility is influenced by conditions including the
following:
Driver camera and multifunction camera
R
recording
The extent to which the windscreen in the
R
area of the multifunction camera is dirty, or if
the camera is misted up, damaged or
obscured
Further system limits of the head-up display
(
page 344).
/
Operating the head-up display
Selecting display content of the head-up display
via the menu bar of the driver's display
Press the ò main menu button on the left.
#
To select the menu bar of the head-up dis-
#
play: swipe upwards on the left-hand Touch
Control.
Switching between display content on the head-
up display
Swipe to the left or right on the left-hand
#
Touch Control.
A preview of the selected display content will
appear on the head-up display.
To confirm: press the a button.
#
Switching back to the driver's display
Press the G or ò button.
#
Setting the position and brightness
Swipe to the left or right on the left-hand
#
Touch Control and select
Settings
menu bar of the head-up display.
Press the left-hand Touch Control.
#
The current position and brightness settings
will be displayed as graphics on the head-up
display as well as on the driver's display.
To adjust the position: swipe upwards or
#
downwards on the left-hand Touch Control.
To adjust the brightness: swipe to the left or
#
right on the left-hand Touch Control.
The settings configured for position and
brightness will be saved automatically.
Press the G or a button to exit the set-
#
tings.
Driver display 347
on the
Advertisement
Table of Contents
