Table of Contents
Advertisement
256 Driving and parking
charging prediction. The charging prediction
refers to the time at which the high-voltage bat-
tery will be fully charged.
%
Depending on the temperature, the fan and
battery cooling system may audibly switch on
during the charging process.
%
If the vehicle is idle for lengthy periods and
connected to the mains supply, the high-volt-
age battery will be recharged automatically as
needed or when electrical consumers are
activated (e.g. the pre-entry climate control).
Ending the direct current charging process (mode
4)
Requirements:
The distance between the key and the vehicle
R
does not exceed 1 m.
Combo 1 vehicle socket
Press charging interruption button 3.
#
The charging process is ended. The % indi-
cator lamp
1
lights up white. The vehicle
socket is unlocked.
Press and hold button
2
on the charging
#
cable connector and remove the charging
cable connector from the vehicle socket.
%
If you cannot remove the charging cable con-
nector, unlock the vehicle and repeat the pro-
cedure. If the charging cable connector is still
locked, contact a qualified specialist work-
shop.
Close the socket cover and the socket flap.
#
Combo 2 vehicle socket
Advertisement
Table of Contents
