Table of Contents
Advertisement
202 Climate control
& WARNING Risk of burns due to repeatedly
switching on the seat heating
Repeatedly switching on the seat heating can
cause the seat cushion and seat backrest pad-
ding to become very hot.
In particular, the health of persons with limited
temperature sensitivity or a limited ability to
react to high temperatures may be affected or
they may even suffer burn-like injuries.
Do not repeatedly switch on the seat
#
heating.
To protect against overheating, the seat heating
may be temporarily deactivated after it has been
switched on repeatedly.
Requirements (plug-in hybrid)
The vehicle is switched off.
R
%
Immediate pre-entry climate control is availa-
ble only for plug-in hybrids or vehicles with a
48-V on-board electrical system.
Air conditioning of the vehicle interior can con-
tinue for up to 50 minutes, e.g. if the journey is
interrupted.
Vehicles with a 48-V on-board electrical sys-
#
tem: press button 1.
The red or blue indicator lamp on button
will light up or go out.
Plug-in hybrid: press & on the climate bar
#
of the central display.
The red or blue indicator lamp below & on
the climate bar on the central display will light
up or go out.
Set the temperature using the s and
#
r arrows on the climate bar on the central
display.
The colours of the indicator lamp have the follow-
ing meanings (plug-in hybrid):
Blue: ventilation or cooling mode is switched
R
on.
Red: heating mode is switched on.
R
The colours of the indicator lamp have the follow-
ing meaning (vehicles with a 48 V on-board elec-
trical system):
Blue: ventilation or cooling mode is switched
R
on.
Red: heating mode is switched on.
R
Yellow: the departure time is preselected.
R
1
Stationary heater/ventilation
Stationary heater/ventilation function
%
The following function is equipment-depend-
ent.
The air inside the vehicle is heated or ventila-
R
ted to the set temperature.
Advertisement
Table of Contents
