Mercedes-Benz S-Class 2022 Owner's Manual page 463

460 Breakdown assistance
If the transport settings are not shown or the
Vehicle not ready for loading
played, the vehicle may not be loaded or
unloaded.
If required, raise the vehicle to transport
#
level again.
A vehicle that cannot be raised to trans-
#
port level may not be loaded or unloaded
using a ramp. Consult a qualified special-
ist workshop.
& WARNING Risk of accident due to activa-
message is dis-
ted transport level
If the vehicle is raised to transport level, driv-
ing and driving safety systems have only limi-
ted availability and the view from the vehicle is
restricted.
Driving safety is severely restricted and there
is a risk of an accident!
Do not use transport level in normal road
#
operation.
Only activate and use transport level to
#
load the vehicle and when not on public
roads.
Ensure that no persons or obstacles are
#
located in the area surrounding the vehi-
cle.
Raising the vehicle to transport level
Press the G button for at least five sec-
#
onds.
Immediately press and hold the a button
#
for at least one second.
The For transport level, switch vehicle on
message is displayed.
Switch on the vehicle ( page 210).
/
#
The transport settings are displayed.
Transport level
Swipe downward to select
#
press a.
The vehicle is raised and the
Do not drive on ramp message is displayed
for 5 seconds. The raising process can last up
to 60 seconds and can be cancelled with the
G button.
When raising, do not switch off the vehicle.
#
While the vehicle is being raised, you can
manoeuvre at a maximum speed of 40 km/h.
and
Vehicle rising...