Table of Contents
Advertisement
134 Seats and stowing
Attaching and removing the additional cushion of
the head restraint in the rear compartment (indi-
vidual seats)
Position head restraint
2
as far forwards as
#
possible.
To attach the additional cushion: open Velcro
#
strip
4
on the rear of additional cushion 1.
Guide Velcro strip
4
between head restraint
#
2
and strip 3.
Close Velcro strip 4.
#
To change the position of the additional cush-
#
ion: move additional cushion
To remove additional cushion: open Velcro
#
strip
4
of additional cushion 1.
Remove additional cushion 1.
#
Attaching a heated additional cushion
In vehicles with electrically adjustable head
restraints, you can heat the additional cushion.
Attach the additional cushion to the head
#
restraint as described.
Move the head restraint to the very top.
#
1
up or down.
Push press-studs
#
into counterpieces
Move the head restraint to the desired height.
#
To switch neck heating from the additional
#
cushion on/off: make sure that press-studs
2
on the additional strip are correctly
pushed into counterpieces
restraint.
Ensure that the "Couple neck heating to seat
#
heating" function is active in the multimedia
system (
Activate or deactivate the seat heating
#
(
page 138).
/
2
on the additional strap
1
on the head restraint.
1
on the head
page 136).
/
Advertisement
Table of Contents
