Table of Contents
Advertisement
376 MBUX multimedia system
be used simultaneously. A user profile can only be
activated simultaneously on one display.
%
Some settings apply to the entire vehicle and
are displayed in all user profiles, e.g. ambient
lighting and the current navigation settings.
These initially belong to the driver, but can
also be changed by the other vehicle occu-
pants in their user profile.
You can individualise a user profile in the vehicle
using the set-up assistant or using the settings in
your user profile. Some settings, e.g. the
Mercedes me PIN and a profile photo are made in
the Mercedes me App or in the Mercedes me Por-
tal.
User-specific content and applications with per-
sonal data are protected by different levels of
security. To access protected content, the
Mercedes me PIN and, depending on the vehicle
equipment, biometric sensors can be used.
%
The security level is set by the multimedia sys-
tem and calculated from the combination of
all sensor inputs. Some security levels cannot
be turned off.
%
When a user profile is activated, the following
personalised comfort systems, for example,
can be adjusted or their settings loaded:
Seat
R
Ambient light
R
Outside mirrors
R
Blinds
R
Climate control settings
R
If the user profile is activated when driving
then the driver's seat position will not be
adjusted.
Depending on the vehicle equipment you can, as
a user, save the following settings, for example:
Driver's seat, steering wheel and mirror set-
R
tings
Climate control
R
Ambient lighting
R
Radio (including station list)
R
Suggestions and favourites
R
Suggestions
The vehicle can learn the habits of the driver. It
then makes suggestions regarding navigation des-
tinations, phone numbers and music preferences.
The requirements for that are the selection of a
user, your consent to the recording of data and
sufficient collected data.
Favourites
Favourites offer you quick access to frequently
used applications. 100 favourites are available in
total.
Configuring users, suggestions and favourites
Requirements:
To use the set-up assistant: the vehicle is sta-
R
tionary.
Multimedia system:
©
f
Change user
4
5
5
Adding a user
Select f
Add user
.
#
A QR code is loaded.
Advertisement
Table of Contents
