Table of Contents
Advertisement
Activating or deactivating enhanced assistance
functions
%
The availability of the functions is dependent
on the country.
Select
Supporting
projections.
#
Activate or deactivate the desired projection.
#
Switch
Projection for locator lighting/vehicle
#
stop
on or off.
If the locator lighting or the exterior switch-off
delay time is activated, a high-resolution greet-
ing or farewell scene will be played back for a
short period of time when the vehicle is
opened or locked. You can choose between
the
Digital Rain
and
Star Wave
%
More information on locator lighting
(
page 179)
/
More information on the exterior switch-off
delay time (
page 179)
/
Adaptive Highbeam Assist Plus
Adaptive Highbeam Assist Plus function
& WARNING Risk of accident despite Adap-
tive Highbeam Assist Plus
Adaptive Highbeam Assist Plus does not react
to:
road users without lights, e.g. pedestrians
R
road users with poor lighting, e.g. cyclists
R
road users whose lighting is obstructed,
R
e.g. by a barrier
On very rare occasions, Adaptive Highbeam
sequences.
Assist Plus may fail to recognise other road
users with their own lighting, or may recognise
them too late.
In these, or in similar situations, the automatic
high beam will not be deactivated or will be
activated despite the presence of other road
users.
Always observe the road and traffic con-
#
ditions carefully and switch off the high
beam in good time.
Light and sight 177
Adaptive Highbeam Assist Plus cannot take into
account road, weather or traffic conditions.
Detection may be restricted in the following
cases:
In poor visibility, e.g. fog, heavy rain or snow
R
If there is dirt on the sensors or the sensors
R
are obscured
Adaptive Highbeam Assist Plus is only an aid. You
are responsible for adjusting the vehicle's lighting
to the prevailing light, visibility and traffic condi-
tions.
Advertisement
Table of Contents
