Table of Contents
Advertisement
526 Display messages and warning/indicator lamps
Display messages
d
Vehicle is operational
Switch off vehicle before
exiting
ï
Operation only possible in
transmission position P
ï
Trailer coupling in motion
Possible causes/consequences and
If the driver's display fails, you may not recognise function restrictions affecting systems relevant to safety or the
speed display, for example. The operating safety of the vehicle may be impaired (
Have the vehicle checked by a qualified specialist workshop immediately.
#
* You are leaving the vehicle in a ready-to-drive state.
Get out of the vehicle, secure it against rolling away and take the key with you.
#
If you do not leave the vehicle, switch off the electrical consumers, e.g. the seat heating. Otherwise, the 12‑V bat-
#
tery may discharge and starting the engine may be possible only with the help of a second battery (jump start).
* The ball neck will not swivel because transmission position h, k or neutral i is selected.
Depress the brake pedal.
#
Engage park position j.
#
* The ball neck is retracting/extending.
Do not attempt to speed up, slow down or initiate the swivel movement using your hand, foot or other aids. During the
swivel movement, do not couple a trailer.
When the ball neck has reached an operational position, the display message will disappear.
Solutions
M
page 379).
/
Advertisement
Table of Contents
