[Set Up Password] - Panasonic PT-RQ25K Series Operating Instructions (Functional Manual)

[Set up password]

[Set up password] page (when accessed by administrator account)
Click [Set up password].
1 [Administrator]
Select this item when changing the setting of the administrator
account.
2 [User]
Select this item when changing the setting of the standard user
account.
[Administrator]
Set the user name and password of the administrator account.
1 [Account]
Displays the account to change.
2 [Current]
[User name]:
Enter the user name before the change.
[Password]:
Enter the current password.
Note
f To change the setting of the administrator account, entry of [User name] and [Password] in [Current] is required.
f When the projector is already registered in application software (such as "Multi Monitoring & Control Software" and "Smart Projector
Control") which uses the communication control via LAN, communication with the projector will become impossible if a user name or
password for [Administrator] is changed. If a user name or password for [Administrator] is changed, update the registration information of
the application software in use.
272 - ENGLISH
Chapter 5 Operations — Using the web control function
1
2
3
4
3 [PJLink]
Select this item when changing the setting of the PJLink
account.
4 [Next]
Displays the screen to change the setting of the password.
1
2
3
4
3 [New]
[User name]:
Enter the desired new user name. (Up to 16 characters in single
byte)
[Password]:
Enter the desired new password. (Up to 16 characters in single
byte)
[Password(Retype)]:
Enter the desired new password again.
4 [Change]
Determines the change of password.