Table of Contents
Advertisement
Note
f The security password is the password set in the [SECURITY] menu → [SECURITY PASSWORD CHANGE].
Initial password of the factory default setting: awsqawsq
Copying the data to another projector using USB
Copying projector data to USB memory
1)
Insert the USB memory into the <USB> terminal.
2)
Press as to select [DATA CLONING].
3)
Press the <ENTER> button.
f The [SECURITY PASSWORD] screen is displayed.
4)
Enter a security password and press the <ENTER> button.
f The [DATA CLONING] screen is displayed.
5)
Press as to select [USB MEMORY].
6)
Press the <ENTER> button.
f The [SELECT COPY TYPE] screen is displayed.
7)
Press as to select [PROJECTOR -> USB MEMORY].
8)
Press the <ENTER> button.
f The confirmation screen is displayed.
9)
Press qw to select [OK], and press the <ENTER> button.
f Copying of data to the USB memory is started.
Once the copying of data is completed, [Data copy finished.] is displayed.
10) Once the copying of the data is completed, disconnect the USB memory from the <USB> terminal.
Note
f The security password is the password set in the [SECURITY] menu → [SECURITY PASSWORD CHANGE].
Initial password of the factory default setting: awsqawsq
f For the USB memory that can be used with the projector and handling of the memory, refer to "Using the USB memory" (x page 96).
f An error message is displayed when saving or reading data to/from the USB memory has failed.
Copying data in the USB memory to the projector
1)
Insert the USB memory into the <USB> terminal.
2)
Press as to select [DATA CLONING].
3)
Press the <ENTER> button.
f The [SECURITY PASSWORD] screen is displayed.
4)
Enter a security password and press the <ENTER> button.
f The [DATA CLONING] screen is displayed.
5)
Press as to select [USB MEMORY].
6)
Press the <ENTER> button.
f The [SELECT COPY TYPE] screen is displayed.
7)
Press as to select [USB MEMORY -> PROJECTOR].
8)
Press the <ENTER> button.
f The confirmation screen is displayed.
9)
Press qw to select [OK], and press the <ENTER> button.
f The projector automatically enters standby state and starts copying data from the USB memory to the
projector.
Chapter 5 Operations — Using the data cloning function
ENGLISH - 289
Advertisement
Table of Contents
