Table of Contents
Advertisement
[3D SETTINGS] menu
(PT-RZ24K and PT-RZ17K only)
On the menu screen, select [3D SETTINGS] from the main menu, and select an item from the sub-menu.
Refer to "Navigating through the menu" (x page 102) for the operation of the menu screen.
[3D SYSTEM SETTING]
Set the image display method to be used during 3D signal input, according to the 3D system in use.
1)
Press as to select [3D SYSTEM SETTING].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[SINGLE]
[DUAL (LEFT)]
[DUAL (RIGHT)]
Note
f When 2D images are input, 2D images are displayed regardless of the [3D SYSTEM SETTING] settings.
[3D SYNC SETTING]
Set the way in which the <3D SYNC 1 IN/OUT> terminal and the <3D SYNC 2 OUT> terminal will be used.
Attention
f Before connecting external devices to the <3D SYNC 1 IN/OUT> terminal and the <3D SYNC 2 OUT> terminal using cables, complete the
[3D SYNC MODE] setting and confirm that the external devices to be connected are turned off.
f Changing the [3D SYNC MODE] setting while the cables are connected may result in malfunctions of the projector or the connected external
devices.
1)
Press as to select [3D SYNC SETTING].
2)
Press the <ENTER> button.
f The precaution message related to [3D SYNC SETTING] is displayed.
3)
Press the <ENTER> button.
f The [3D SYNC SETTING] screen is displayed.
4)
Press as to select [3D SYNC MODE].
5)
Press qw to switch the item.
[3D SYNC MODE]
[OFF]
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
6)
When [1], [4], [7], or [10] is selected, press as to select [STEREO SYNC OUTPUT DELAY], and press
qw to set the amount of delay for output.
[0us] - [25000us]
f To synchronize multiple projectors to display 3D images, use a frame sync input and output.
134 - ENGLISH
Chapter 4 Settings — [3D SETTINGS] menu
During 3D signal input, images for the left eye and right eye are alternately displayed using the frame
sequential format.
Only images for the left eye are displayed during 3D signal input.
Only images for the right eye are displayed during 3D signal input.
Details to be set in [3D SYNC1]
Not used.
3D trigger output
3D trigger output
Stereo sync input
Stereo sync input
Stereo sync input
Frame sync input
Frame sync input
Frame sync input
3D trigger output
Stereo sync output
3D IR TRANSMITTER (+) output
Sets the amount in 10 us increments.
Details to be set in [3D SYNC2]
Not used.
Stereo sync output
3D trigger output
Through 3D SYNC1
Stereo sync output
3D trigger output
Through 3D SYNC1
Stereo sync output
3D trigger output
Frame sync output
Frame sync output
3D IR TRANSMITTER (-) output
Advertisement
Table of Contents
