[Info Monitor Setting] - Panasonic PT-RQ25K Series Operating Instructions (Functional Manual)

[INFO MONITOR SETTING]

Set the information monitor of the control panel.
For operation of the information monitor, refer to "Using the information monitor function" (x page 275).
Setting the display during normal status
Display/hide the information monitor during no operation.
1) Press as to select [INFO MONITOR SETTING].
2) Press the <ENTER> button.
f The [INFO MONITOR SETTING] screen is displayed.
3) Press as to select [DEFAULT].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[USER VIEW]
[OFF]
Note
f Even if [DEFAULT] is set to [OFF], the content of an error or a warning is automatically displayed when it occurs.
f This can also be set with operation in the information monitor. For details, refer to "Using the information monitor function" (x page 275).
Setting the information to display
Set the items to display on the information monitor during no operation.
1) Press as to select [INFO MONITOR SETTING].
2) Press the <ENTER> button.
f The [INFO MONITOR SETTING] screen is displayed.
3) Press as to select [USER VIEW].
4) Press the <ENTER> button.
f The [USER VIEW] screen is displayed.
5) Press as to select an item.
[INPUT]
[SIGNAL NAME]
[AC VOLTAGE]
[INTAKE AIR TEMP.]
[EXHAUST AIR TEMP.]
[SHUTTER]
[FREEZE]
[OSD]
[IP ADDRESS(WIRED)]
*1 The representative input is displayed when one image is displayed with multiple input signals.
6) Press qw to switch the setting.
f The items will switch each time you press the button.
[ON]
[OFF]
f Repeat Steps 5) to 6) until the desired display items are set.
Note
f This can also be set with operation in the information monitor. For details, refer to "Using the information monitor function" (x page 275).
204 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
Displays the items set in the [PROJECTOR SETUP] menu → [INFO MONITOR SETTING] → [USER
VIEW].
Does not display the information.
Currently selected input
*1
Input signal name
Input supply voltage
Intake air temperature of the projector
Exhaust air temperature of the projector
Status of the shutter ([CLOSE]: Shutter function enabled; [OPEN]: Shutter function disabled)
Operation status of the freeze function ([ON]: Paused; [OFF]: Cleared)
Status of the on-screen display function ([ON]: Display; [OFF]: Hide)
IP address of the wired LAN
Displays the items in the information monitor.
Does not display the items in the information monitor.