[Set Up Password] - Panasonic PT-FRQ60WU7 Operating Instructions Manual

[Network security] page
Make settings to protect the projector from external attacks via LAN and unauthorized use.
Click [Detailed set up] → [Network security].
1 [COMMAND PROTECT]
Make settings for the connection authentication when using the
command control function.
[DISABLE]: Connect to the projector in non-protected mode.
Connection authentication is not performed.
[ENABLE]: Connect to the projector in protected mode.
The user name and password of the administrator account are
required for the connection authentication.
Note
f When [COMMAND PROTECT] is set to [DISABLE], connection authentication is not performed, making it vulnerable to threats on the
network. Be aware of the risks before making settings.
f For details on how to use the command control function, refer to "Control commands via LAN". ( x page 204)

[Set up password]

[Set up password] page (for administrator account)
Click [Set up password].
1 [Administrator]
Used to change the setting of the administrator account.
2 [User]
Used to change the setting of the standard user account.
176 - ENGLISH
Chapter 5 Operations — Using the web control function
1
2
2 [Submit]
Updates the setting.
If you click [Submit] with [DISABLE] selected in [COMMAND
PROTECT], a confirmation screen will be displayed. Click [OK]
on the confirmation screen to update the settings.
1
2
3
4
3 [PJLink]
Used to change the setting of the PJLink account.
4 [Next]
Used to change the setting of the password.