Table of Contents
Advertisement
Generating the self-signed certificate
When the server certificate issued by the certification organization is not to be used as the security certificate, it
is possible to use the self-signed certificate generated in the projector. Generate the self-signed certificate after
generating the CRT key.
1)
Click [Certificate] → [Self-signed Certificate] → [Generate] → [Execute].
f The page to generate the self-signed certificate is displayed.
2)
Enter the information required for generation.
f The details of each item are as follows.
Item
[Common Name]
[Country]
[State]
[Locality]
[Organization]
[Organization Unit]
[CRT key]
3)
Click [OK].
f Self-signed certificate is generated.
Note
f The characters that can be input are as follows.
g Single-byte numbers: 0 to 9
g Single-byte alphabets: A to Z, a to z
g Single-byte symbols: - . _ , + / ( )
262 - ENGLISH
Chapter 5 Operations — Using the web control function
Enter the projector name or the IP address set in the projector.
Enter the country code defined in ISO 3166-1 alpha-2 (two upper case
alphabets).
Enter the State, etc.
Enter the locality.
Enter the organization name.
Enter the organization unit name.
[RSA key size]
[Last modified]
Details
The key length of the current CRT key is
displayed.
The generation date and time of the current
CRT key is displayed.
Character length
limit
64 characters
―
128 characters
128 characters
64 characters
64 characters
―
―
Advertisement
Table of Contents
