A - Option
B - Included screw
6.
Use one of the remaining included screws (B) to connect the ground wire (A) to
the ground terminal and installation hole on the option.
Tighten the screw to a correct tightening torque:
• 0.5 N∙m to 0.6 N∙m (4.4 lbf∙in to 5.3 lbf∙in)
Note:
Refer to
Figure 5.20
YASKAWA TOEP C730600 85A CANopen Installation Manual
Figure 5.19 Install the Option
for instructions about crimp terminal orientation (C) and wire routing.
C - Connector CN5
5 Installation Procedure
33