REMKO Smart Control Touch Operating Manual page 85

Heat carrier medium
Selection of the filled solar liquid for calculation of the amount of solar heat.
Menu item
Heat carrier medium
Acquisition of the stored energy via the S 09 probe
If heating is to be provided from the available solar yield (if required), this parameter must be activated.
If another heat generator is connected to the system hydraulically, e.g. water-based chimney heat
exchanger, this parameter must be activated and the S 09 probe must be installed.
Menu item
Acquisition of the stored energy
Parameter
Water
DOWCAL 10
DOWCAL 20
TYFCOR
TYFOCOR-L
TYFOCOR-LS
ANTIFROGEN-N
ANTIFROGEN-SOL
Temper-10
Temper-15
Temper-20
Temper-30
Temper-40
Temper-55
GLYTHERMIN P44
Parameter
Combination storage tank
Heating buffer
Factory setting
TYFOCOR-L
Factory setting
Deactivated
85