Subscribe to Our Youtube Channel
Related Manuals for REMKO GSG-4
Summary of Contents for REMKO GSG-4
- Page 1 REMKO GSG-4 Multi-unit control device for REMKO GPA-C Edition GB - P06 Operation Technology Original REMKO REMKO - powerful like a bear...
- Page 3 Read these instructions carefully before putting the control unit into operation and then using it. The REMKO GSG-4 control unit is used in combination with an addi- tional external temperature control (e.g. REMKO ATR-1 or ATR-3) to connect and control a max. of 4 heaters.
- Page 4 STB-RESET button in the inspection room of the heater must also be pressed (see the operating instructions for the heater). The REMKO GSG-4 control unit may only be connected to a 7-pole plug of the GPA-C heating units intended for this purpose.
- Page 5 Note: The integrated contactor (K1) is controlled by the separately installed external control unit and isolates the respective heater. Operation that complies with regulations is only assured when a thermostat (REMKO ATR-1, ATR-3 or ) is installed and connected for temperature control.
- Page 6 Operating switch Reset button Plug, 7-pole Only have the REMKO GSG-4 control unit installed and put into operation by authorised personnel in accordance with the rele- vant regulations. We reserve the right to make changes to dimensions and design in the interest of technical progress.
- Page 8 REMKO GmbH & Co. KG Klima- und Wärmetechnik D-32791 Lage Im Seelenkamp 12 • D-32777 Lage PO Box 1827 • Phone +49 (5232) 606 - 0 +49 (5232) 606260 E-Mail: info@remko.de Internet: www.remko.de...
Need help?
Do you have a question about the GSG-4 and is the answer not in the manual?
Questions and answers