Assembly And Setup; Shipping Bracket - Clarke METALWORKER CBS7MC Operation And Maintenance Instruction

ASSEMBLY & SET UP
The bandsaw comes partly assembled. Unpack and lay out all the items and
identify each one, referring to pages 9 & 10.
If any parts are missing, immediately contact the dealer where the product
was purchased.
CLEAN UP
The unpainted surfaces of your machine are coated with a heavy duty rust
preventative that prevents corrosion during shipment and storage. This rust
preventative works extremely well, but it will take a little time to clean.
There are many ways to remove this rust preventative, but the following steps
work well in a wide variety of situations. Always follow the manufacturers
instructions with any cleaning product you use and make sure you work in a
well ventilated area to minimise exposure to toxic fumes.
BEFORE CLEANING, GATHER THE FOLLOWING:
• Disposable rags/cloth
• Cleaner/degreaser
• Safety glasses & disposable gloves
• Plastic paint scraper (optional)
BASIC STEPS FOR REMOVING RUST PREVENTATIVE
1. Coat the rust preventive with a liberal amount of cleaner/degreaser and
let it soak for 5-10 minutes.
2. Wipe off the surface. If the cleaner/degreaser is effective, the rust
preventative will wipe off easily. If you have a plastic paint scraper, scrape
off as much as you can first, then wipe off the rest with a rag.
3. Repeat steps 1 & 2 as necessary until clean, then coat all unpainted
surfaces with a quality metal protectant to prevent rust.

SHIPPING BRACKET

A shipping bracket has been installed on the bandsaw to protect the
alignment of the bow during shipment. After removal, store the bracket in a
safe place until you need to move or ship the bandsaw in the future.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
11