Module Identification - Bosch rexroth NYCe 4000 Hardware Manual

84/233
NY4125: 5-axis low power PWM Drive Module
9.2

Module identification

Bosch Rexroth AG R911337671_Edition 18
NYCe 4000 Multi-axis motion control system Hardware Sys‐
● 4 digital outputs.
● 2 fast digital inputs. One general purpose, one stop alarm input for all
axes.
● 2 fast digital outputs.
● 5 general purpose TTL digital inputs. Edge detection, counter
functionality, etc. is not supported on these inputs.
If a drive slot was configured for an NY4120 or NY4140 drive
module and now used for an NY4125 drive module, make sure
that the DP drive voltage is changed (lowered) before you install
the NY4125 drive module.
An identification label is attached on the NY4125 module.
NYM04.1-5PW-NNNN
5 12W50
172221-00542
97058789
Fig. 9-2: Identification label of the NY4125
Identification number Field explanation
1 Type code
2 Version level and status
3 Material number
4 2D bar code
5 Date of manufacture (yyWww)
6 Serial number
7 Manufacturer ID
Tab. 9-1: Explanation of the fields of the NY4125 identification label
2 3
1
AE1 R911
7 6
tem Manual
4