Important Directions For Use; Appropriate Use; Areas Of Use And Application - Bosch rexroth NYCe 4000 Hardware Manual

NYCe 4000 Multi-axis motion control system Hardware Sys‐
tem Manual
3

Important Directions for Use

3.1

Appropriate Use

3.2

Areas of use and Application

Introduction
Rexroth products represent state-of-the-art developments and manufacturing.
They are tested prior to delivery to ensure operating safety and reliability.
WARNING
The products have been designed for use in the industrial environment and
may only be used in the appropriate way. If they are not used in the
appropriate way, situations resulting in property damage and personal injury
can occur.
Rexroth, as manufacturer, is not liable for any damages resulting
from inappropriate use. In such cases, the guarantee and the
right to payment of damages resulting from inappropriate use are
forfeited. The user alone carries all responsibility of the risks.
Before using Rexroth products, make sure that all the pre-requisites for an
appropriate use of the products are satisfied:
● Personnel that in any way, shape or form uses our products must first
read and understand the relevant safety instructions and be familiar with
appropriate use.
● If the product takes the form of hardware, then they must remain in their
original state, in other words, no structural changes are permitted. It is
not permitted to decompile software products or alter source codes.
● Do not install damaged or faulty products or use them in operation.
● Make sure that the products have been installed in the manner
described in the relevant documentation.
NYCe 4000 modules made by Rexroth are designed to control electrical
motors and monitor their operation.
Control and monitoring of the motors may require additional sensors and
actuators.
Important Directions for Use
Personal injury and property damage caused
by incorrect use of the products!
R911337671_Edition 18 Bosch Rexroth AG
19/233