Laser Safety And Compliance; Class I Laser Product; Protective Devices; Monitored Access To The Library - IBM System Storage TS3310 Setup And Operator Manual

Electrical
Mechanical
Chemical
Repair any of the preceding problems before you use the library.

Laser Safety and Compliance

Before using the library, review the following laser safety information.

Class I Laser Product

The library may contain a laser assembly that complies with the performance
standards set by the U.S. Food and Drug Administration for a Class I laser
product. Class I laser products do not emit hazardous laser radiation. The library
has the necessary protective housing and scanning safeguards to ensure that laser
radiation is inaccessible during operation or is within Class I limits. External safety
agencies have reviewed the library and have obtained approvals to the latest
standards as they apply.

Protective Devices

The library has the following protective devices:
v Monitored access to the library
v Main power switch
The sections that follow describe each type of protection.

Monitored Access to the Library

The library is completely surrounded by an enclosure. The library can be accessed
only through monitored access areas.
The enclosure around the library separates the danger area of the library from the
normal working area. The danger area is the area in which personnel can be
injured by component movements.

Main Power Switch

To turn ON the power to the library, press | on each power switch installed in the
library. To turn OFF the power, press 0 on the switch. In case of danger to
personnel or property, immediately turn OFF the main power switch.
xiv
TS3310 Tape Library Setup and Operator Guide
An electrically charged frame can cause serious electrical shock.
Hazards, such as a safety cover missing, are potentially harmful to
people.
Do not use solvents, cleaners, or other chemicals not approved for
use on this product.
CAUTION:
Movements of mechanical components in the library can cause
serious injury. Access to the library should be restricted to
authorized personnel only.
CAUTION:
To completely remove all power, disconnect the line cord from
the electrical outlet.