Step 1: Log In To The Operator Panel; Operator Panel Log In Screen - IBM System Storage TS3310 Setup And Operator Manual

Important: Use the Appendix D, "Library Configuration Form," on page D-1 to

Step 1: Log in to the Operator Panel

If necessary, log in to the Operator Panel. If the Setup Wizard: Welcome screen
appears, skip this step.
On the Operator Panel Log in screen:
Figure 6-1. Operator Panel Log in screen
1. Touch the User name text field to access the alphanumeric keyboards.
2. Use the alphabetic keyboard to enter admin, then touch OK.
3. Touch the Password text field to access the alphanumeric keyboards.
4. Use the alphabetic keyboard to enter secure, then touch OK.
5. Touch OK again to access the Capacity View home screen which displays the
6. Delete the library's default logical library setting.
Now you are ready to configure your library using the Setup Wizard.
6-2
TS3310 Tape Library Setup and Operator Guide
library remotely from the Web User Interface. You can, however, return to the
Setup Wizard at any time and modify network and other settings.
record all library settings. At this time, there is no way to
electronically save and restore library settings.
default configuration of the library.
a. Select Setup → Delete Logical Libraries. and follow the on-screen prompts.